XG3780 device

Scripts

For the driver login/logout logic to work, the device should run this script:

xirgo_device_scripts/gsat_driver_login_logout_logic_XG3780.pwn

Script Behavior

After the ignition is on, the script will activate the buzzer in 10 seconds, prompting the driver to login by touching their IButton ID (the driver can login without waiting for the buzzer).

Once the driver has logged in, the immobilizer is deactivated and the driver login event is registered in the system.

Upon ignition off the driver log out event is registered and immobilizer is activated.

Script settings (available only via editing the script source code)

new const bool:BuzzerEnabled = true; // When false, inhibits the buzzer output new const BuzzerDelaySec = 10; // Seconds till buzzer output is enabled new const BuzzerOnTimeSec = 1; // Seconds buzzer is on new const BuzzerOffTimeSec = 2; // Seconds buzzer is off new const BuzzerRepeat = 10; // Number of times the buzzer repeats the on/off cycle new const bool:ImmobilizerEnabled = true; // When false, inhibits the immobilizer output

Pinout

• IN2 - Panic push button (or switch) (1 = ON)
• IN5 - Ignition (1 = ON)
• OUT1 - Buzzer (1 = ON)
• OUT2 - Immobilizer (1 = ON)
• 1-wire - IButton driver ID

GSatTrack Outputs/Events mapping

Outputs (TrackingGpio)

Note. CAN bus parameters are currently unavailable.

Events (TrackingEvent)

The remote device only reports its current state, all the events are generated in the server via comparing the current device state to the previous.