Vulcan Scale

Entering Test Mode

On power up as soon as you see the version number, quickly press the power button again to switch to test mode.
Press the cycle button to go to test mode 6.
Press the down arrow. The dots moving across the screen show it is outputting data.
Press and hold cycle till the zero starts to flash and then up or down to dial in a weight for channel A.
Press the cycle button again to move to channel B where you can again dial in the weight using the up and down arrows.
Press cycle a final time to exit the enter weight mode.
Finally, press menu to enter the “PP GPS” mode.

Press PWR/MENU button to turn on the meter
After the meter has completed its startup routine and is running, press the PWR/MENU button to enter the program menu.
Press the CYCLE button to go through the different programming options.
Press the CYCLE button until PROGRAM PORT (“PP”) appears on the screen.
Use the UP or DOWN button to choose “PP GPS”.
Press the CYCLE or PWR/MENU button to store the serial output format selected. Press the CYCLE button to advance to the next programming function. Press the PWR/MENU button to return to normal weight display mode.